Error and Warning Messages
HP NonStop TMF Management Programming Manual—540140-008
7-23
Errors
249 ZTMF-ERR-TMFNOTCONFIGURED
The TMF subsystem must be configured through SYSGEN.
The ZTMF-TKN-FS-ERROR token returned within the error list provides
additional information.
253 ZTMF-ERR-TMFNOTUPORSTOPPING
This command can be used only when the TMF subsystem is ACTIVE or
STOPPING.
254 ZTMF-ERR-MUSTBESUPERSUPER
The user ID SUPER.SUPER (255,255) must be used to execute this command.
The ZTMF-TKN-USER token supplied within the error list provides
additional information.
255ZTMF-ERR-MUSTBESUPERGROUP
A user ID in the SUPER group (255,*) must be used to execute this command.
The ZTMF-TKN-USER token supplied within the error list provides
additional information.
256 ZTMF-ERR-MUSTBECONFIGOWNER
The user ID of the owner of the TMF configuration files—or the user ID
SUPER.SUPER (255,255)—must be used to execute this command.
The ZTMF-TKN-USER and ZTMF-TKN-REQUIREDUSER tokens that are
supplied within the error list provide additional information.
257 ZTMF-ERR-MUSTBESPECIFICUSER
The user ID supplied in the ZTMF-TKN-REQUIREDUSER token—or the user
ID SUPER.SUPER (255,255)—must be used to execute this command.
The ZTMF-TKN-USER and ZTMF-TKN-REQUIREDUSER tokens that are
supplied within the error list provide additional information.
258 ZTMF-ERR-STARTUPNEWPROCESS
The PROCESS_CREATE procedure cannot be performed.
The ZTMF-TKN-PROCESS, ZTMF-TKN-FILENAME, and ZSPI-TKN-
ERROR tokens supplied within the error list provide additional information.
To Next Page
Loading...
