HP NonStop TMF User Manual

Error and Warning Messages
HP NonStop TMF Management Programming Manual—540140-008
7-43
Errors
445 ZTMF-ERR-INVSWAP
An ALTER PROCESS command specified an erroneous SWAP value.
No error list is returned in the response.
446 ZTMF-ERR-TOOMANYSWAP
An ALTER PROCESS command specified multiple SWAP values.
No error list is returned in the response.
447 ZTMF-ERR-INVTERM
An ALTER PROCESS command specified an erroneous TERM value.
No error list is returned in the response.
448 ZTMF-ERR-INVEXTENDEDSEGSIZE
An ALTER PROCESS command specified an erroneous EXTENDEDSEGSIZE
value.
No error list is returned in the response.
449 ZTMF-ERR-INVPFCSIZE
An ALTER PROCESS command specified an erroneous PFSIZE value.
No error list is returned in the response.
450 ZTMF-ERR-ONCONFIGVOL
During execution of an ALTER TMF command, a file-system error occurred
while accessing the configuration volume.
The error number and the configuration volume name are returned in this error.
451 ZTMF-ERR-NOTSTOPPEDFORALTERTMF
An ALTER TMF command was issued while the TMF subsystem was running
(the TMF subsystem must be stopped when issuing that command).
No error list is returned in the response.
452 ZTMF-ERR-MUSTBEONLYVOLUME
An ALTER TMF command specified multiple configuration volumes (it must
specify only one).
No error list is returned in the response.

HP NonStop TMF Specifications

General

Brand	HP
Model	NonStop TMF
Category	Software
Language	English