1920S Switch Series Information — Regulatory and Safety
1920S-8G
Switch
(JL380A)
1920S-24G
Switch
(JL381A)
1920S-48G
Switch
(JL382A)
1920S-8G-
PPoE
+ (65W)
Switch
(JL383A)
1920S-24G-
PPoE
+ (185W)
Switch
(JL384A)
1920S-24G-
POE
+ (370W)
Switch
(JL385A)
1920S-48G-
PPoE
+ (370W)
Switch
(JL386A)
Electrical: For power,
requires one
of the
following:
• External
power
adapter
module.
• or, PoE
PD
connectio
ns to Port
1
For power,
requires a
power cord
connection
from an AC
power source
For power,
requires a
power cord
connection
from an AC
power source
For power,
external
power
adapter
module is
required.
For power,
requires a
power cord
connection
from an AC
power source
For power,
requires a
power cord
connection
from an AC
power source
AC voltage: 100-127 /
200-240
100-127 /
200-240
100-127 /
200-240
100-127 /
200-240
Maximum
current:
0.5 / 0.3 A 0.8 / 0.5 A 2.6 / 1.3 A 5.1 / 2.6 A
Frequency
range:
50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
1920S-8G, 1920S-24G, 1920S-48G, 1920S-8G-PPoE
+ (65W), 1920S-24G-PPoE+ (185W), 1920S-24G-PoE
+ (370W), and 1920S-48G-PPoE+ (370W) Switches
Environmental
:
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Relative humidity: 15% to 95% at 40°C (104°F), non-condensing
Non-Operating Temperature: -40°C to 70°C (-40°F to 158°F)
Non-Operating Relative humidity: 15% to 90% at 65°C (149°F), non-condensing
Maximum Operating Altitude: Up to 3 km (10,000 ft)The operating maximum altitude
should not exceed that of any accessory being connected
to the switch.
Table Continued
1920S Switch Series Information — Regulatory and Safety 11