To Next Page

To Previous Page

HPE OfficeConnect 1920S Switch Series

The switch drawings in this document are for illustration only and may not match your particular

switch model.

For more detailed instructions and information to set up your switch, view or download the Installation and

Getting Started Guide for your switch at

http://www.hpe.com/support/hpesc.

NOTE:

The HPE OfficeConnect 1920S Switch Series 8-port, 24-port, and 48-port non-PoE+ models have a

fan-free design, making them quiet for office deployments. A warmer than normal enclosure is a

standard state of operation for a fan-free switch.

Although the top of the switch enclosure may feel warm to the touch, it has no effect on functionality

or performance of the product.

1. Unpack and check included parts. • Documentation kit

• Switch

• Accessory kit (installation hardware)

• AC power cord for HPE 1920S-24G,

1920S-24G-PPoE+, 1920S-24G-PoE+,

1920S-48G, and 1920S-48G-PPoE switch

models or DC external power adapter for

1920S-8G and 1920S-8G-PPoE+ switch models

2. Prepare for installation. To avoid personal injury or product damage, review the Safety

Precautions.

3. Power-on and verify that Self-Test completes normally.

For the 1920S-24G, 1920S-24G-PPoE+, 1920S-24G-PoE+, 1920S-48G, and 1920S-48G-PoE+

switches, first connect the power cord to the power connector at the back of the switch. Then, connect

the other end of the power cord into an electrical outlet. For the 1920S-8G and 1920S-8G-PoE+

switches, connect the AC/DC adapter power cord to the power connector at the back of the switch. Then

plug the AC/DC power adapter into an electrical outlet.

4. Mount the switch.

4 HPE OfficeConnect 1920S Switch Series

Questions and Answers:

Need help?

Do you have a question about the HP OfficeConnect 1920S 8G and is the answer not in the manual?

HP OfficeConnect 1920S 8G Specifications

General