reference guide
quick start
5
1 Load your original in the automatic document feeder (ADF) print side
down.
Note: Do not feed photos smaller than 3.5-by-5 inches through the
automatic document feeder.
2 Slide the right and left paper guides in until they stop at the edges of the
paper.
3 Press the Copy button.
4 Press Start Color.
If you had wanted to save the picture to the computer, you would have
pressed Scan, then Start Color. For this tutorial, you will continue making a
copy.
The default is a single copy. Pressing the Start Color button on the
HP Officejet automatically prints one color copy of the original that is
loaded in the ADF. If you had pressed the Start Black button, the
HP Officejet would have made a single black-and-white copy of your color
picture.
enhance your copy
1 Reload your original in the ADF print side down, press the Copy button,
then press to increase the number of copies to 2.
2 Press Start Black on the front panel.
The HP Officejet makes two black-and-white copies of your picture.
Notice that you did not have to do anything else but select the number of
copies and press a start key. Now you will change an additional setting
before making more copies.
3 Reload your original in the ADF print side down, press the Copy button,
then press to increase the number of copies to 3.
4 Press Copy until Reduce/Enlarge appears.
5 Press until Custom 100% appears in the front-panel display, then press
Enter.
Set Custom Size appears in the front-panel display.
Use this option to reduce or enlarge your picture.
To Next Page
Loading...