hp officejet 4100 series
chapter 3
10
load envelopes
Use the print feature of your software to print to envelopes with your HP Officejet.
Do not use shiny or embossed envelopes, or envelopes that have clasps or
windows. You can load the paper tray with one or multiple envelopes.
1 Remove all paper from the paper tray.
2 Slide an envelope into the tray, with the envelope flap up and to the left
(print-side down), until it stops.
3 Adjust the paper-width guide against the envelope until it stops.
Be careful not to bend the envelope.
If you are loading multiple envelopes, make sure the envelopes fit within
the tray (do not overload it).
Consult the help files in your word processing software for details on how
to format text for printing on envelopes.
load 4 x 6 inch photo paper
Following is the procedure for loading 4-by-6 inch photo paper into your
HP Officejet.
1 Remove all paper from the paper tray, and then slide a stack of photo
paper into the tray until it stops.
Make sure the print-side faces down.
If the photo paper you are using has perforated tabs, load the photo paper
so that the tabs are closest to you.
To Next Page
Loading...