reference guide
load originals and load paper
11
2 Adjust the paper-width guide against the stack of photo paper until it stops.
Make sure the photo paper fits within the tray (do not overload it).
Note: Make sure you set the paper type and paper size before printing. See
set the paper type on page 15 and set the paper size on page 15.
load postcards or hagaki cards
Following is the procedure for loading postcards or hagaki cards.
1 Remove all paper from the paper tray, and then slide a stack of cards into
the tray until they stop.
Make sure the print-side faces down.
2 Adjust the paper-width guide against the cards until it stops.
Make sure the cards fit within the tray (do not overload it).
recommended papers
If you want the best print quality, we recommend HP Premium Inkjet papers.
Using paper that is too thin, paper that has a slick texture, or paper that stretches
easily can cause paper jams. Using paper that has a heavy texture or does not
To Next Page
Loading...