hp officejet 4100 series
chapter 4
18
Tip — To make a single copy, press the Copy button and then press
Start Black or Start Color.
Note: If you are making a color copy on plain paper or a black or color
copy on photo paper, the color print cartridge must be installed.
increase copy speed or quality
The HP Officejet provides three options that affect copy speed and quality.
• Best produces the highest quality for all paper types and eliminates the
banding (striping) effect that sometimes occurs in solid areas. Best copies
more slowly than the other quality settings.
• Normal delivers high-quality output and is the recommended setting for
most of your copying. Normal copies faster than Best.
• Fast copies faster than the Normal setting. The text is of comparable
quality to the Normal setting, but the graphics may be of lower quality.
Using Fast also cuts down on the frequency of replacing your print
cartridges, because it uses less ink.
1 Load your original.
2 Press Copy until Copy Quality appears.
3 Press until the desired quality setting appears, and then press Enter to
select it.
4 Press Start Black or Start Color.
set the number of copies
You can set the number of copies using the front panel.
1 Press the Copy button.
2 Use the keypad or press the or to enter the number of copies.
You can make up to 99 copies.
3 Press Enter.
4 Press Start Black or Start Color.
Tip — If you hold down the right arrow button, then after reaching
10 the number of copies changes by increments of five to make it
easier to set a large number of copies.
reduce or enlarge a copy
You can reduce or enlarge a copy of an original using Reduce/Enlarge.
For more information about additional copy options such as Fit to Page, see
perform special copy jobs on page 19.
1 Press Copy until Reduce/Enlarge appears.
2 Press until the appropriate Reduce/Enlarge option appears, and then
press Enter to select it.
3 If you select Custom 100%, Set Custom Size appears. Use the arrow keys or
type a percentage on the keypad.
4 Press Enter when the desired percentage is displayed.
5 Press Start Black or Start Color.
To Next Page
Loading...