HP Officejet 4100 - print specifications

hp officejet 4100 series
chapter 9
70
8 Place the print cartridge back into the holder.
9 Repeat if necessary for the other print cartridge.
10 Close the door and plug in the unit.
Because you removed a print cartridge from its holder, the HP Officejet
needs to align the cartridges.
11 After the message appears in the front-panel display, press Enter to align
the cartridges.
12 Follow the procedure described in align the print cartridges on page 68.
restore factory defaults
You can restore the original factory settings to what they were when you
purchased your HP Officejet. Choosing to restore your factory defaults restores
all settings, except date information.
You can perform this process from the front panel only.
1 Press Setup.
2 Press 5, then press 3.
This selects Maintenance, and then selects Restore Factory Defaults.
The factory default settings are restored.
set scroll speed
The Scroll Speed option lets you control the rate that text messages appear in the
front-panel display. You can choose Normal, Fast, or Slow. The default is
Normal.
1 Press Setup.
2 Press 5, then press 6.
This selects Maintenance, and then selects Set Scroll Speed.
3 Press until the desired speed appears, then press Enter.