HP OmniBook 6100 Service Manual

2-2 Removal and Replacement HP Omnibook 6000/6100
Table 2-2. Required Equipment
• Small Phillips screwdriver, preferably magnetized.
• Small flat-blade screwdriver.
• IC (PLCC) removal tool (similar to OK Industries EX-5).
Table 2-3. Recommended Screw Torques
Screw Thread Size Torque (cm-kgf) Torque (in-lbf)
M2 1.3 – 1.8 1.1 – 1.5
M2.5 (2–11 mm long) 3.0 – 3.5 2.6 – 3.0
M2.5 (12–19 mm long) 2.5 – 3.0 2.2 – 2.6
M3 3.0 – 3.5 2.6 – 3.0
Disassembly Flowchart
The following diagram shows the general “path” you will use in disassembling the computer to access
any particular component.

HP OmniBook 6100 Specifications

General

Brand	HP
Model	OmniBook 6100
Category	Laptop
Language	English