Removal and Replacement Procedures
Maintenance and Service Guide 5ā59
2. Remove the Phillips PM2.5Ć6.0 screw 1 that secures the
USB/audio board to the base enclosure.
3. Remove the USB/audio board 2 from the base enclosure.
4. Disconnect the USB/audio board cable 3 from the
USB/audio board.
ā
The USB/audio board cable is available in the Cable Kit, spare
part number 407774-001.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
