Removal and Replacement Procedures
Maintenance and Service Guide 5ā61
2. Turn the system board upside down with the expansion port 2
toward you.
3. Remove the four Phillips PM2.5Ć6.0 screws 1 that secure the
heat sink to the system board.
4. Remove the heat sink 2.
ā
Due to the adhesive quality of the thermal paste located
between the fan assembly and processor 3, it may be
necessary to move the fan assembly from side to side to detach
the it from the processor.
Removing the Heat Sink
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
