5–42 Maintenance and Service Guide
Removal and Replacement Procedures
20. Release the retention tabs 1 built in to the display enclosure
lining that secure the wireless antenna cables to the display
enclosure.
21. Detach the wireless antenna transceivers 2 from the display
enclosure.
22. Remove the wireless antenna transceivers and cables 3.
Removing the Wireless Antenna Transceivers and Cables
Reverse the above procedure to reassemble and install the
display assembly.
Display Assembly Subcomponents
Spare Part Number Information
Wireless Antenna Kit (includes cable and transceivers) 403882-001
To Next Page
Loading...
