Removal and Replacement Procedures
Maintenance and Service Guide 5–53
6. Remove the following screws:
1 One Phillips PM2.5×9.0 screw that secures the system
board to the base enclosure
2 Four silver Phillips PM2.5×6.0 screws that secure the
system board to the base enclosure
3 One Phillips PM2.5×4.0 screw that secures the connector
board to the base enclosure
7. Remove the ExpressCard assembly 4.
✎
The ExpressCard assembly is available using spare part
number 403838-001.
Removing the System Board Screws
To Next Page
Loading...
