4 Power settings
This section explains standby, hibernation, and shutdown procedures.
Turning the computer or display on or off
Task Procedure Result
Turn on the computer. Press the power button.
●
The power lights are turned on.
●
The operating system loads.
Shut down the computer.* 1. Save your work and close all open
programs.
2. Shut down the computer through
the operating system by selecting
Start > Turn Off Computer > Turn
Off.*
●
The power lights are turned off.
●
The operating system shuts down.
●
The computer is turned off.
Turn off the display while
the power is on.
Close the computer. Closing the computer activates the display switch,
which initiates standby.
*If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer.
ENWW Turning the computer or display on or off 9
To Next Page
Loading...
