Component Description
If the computer has stopped responding and Microsoft® Windows®
shutdown procedures cannot be used, press and hold the power
button for at least 5 seconds to turn off the computer.
(3) Power lights* (2) On: The computer is on.
Blinking: The computer is in standby.
Off: The computer is off or in hibernation.
(4) fn+f5 Initiates standby.
(5) Battery light Amber: A battery is charging.
Green: A battery is close to full charge capacity.
Blinking amber: A battery that is the only available power source
has reached a low-battery condition. When the battery reaches a
critical low-battery condition, the battery light begins blinking
rapidly.
Off: If the computer is plugged into an external power source, the
light is turned off when all batteries in the computer are fully
charged. If the computer is not plugged into an external power
source, the light stays off until the battery reaches a low-battery
condition.
*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The
light on the front of the computer is visible whether the computer is open or closed.
2 Chapter 1 Power control and light locations ENWW
To Next Page
Loading...
Need help?
General
