b. Lift the top edge of the display panel assembly (2) and swing it up and back until it rests in an
upright position.
c. Release the adhesive support strip (1) that secures the display panel cable to the display
panel assembly.
d. Disconnect the display panel cable (2) from the display panel assembly.
e. Remove the display panel assembly (3).
The display panel assembly is available using spare part number L52049-001.
10. If it is necessary to replace the display panel cable:
a. Remove the display panel assembly.
b. Release the display panel cable (1) from the display right hinge.
44 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
