HP PRO 10 EE - Installing a micro SIM card (select products only); Using GPS (select products only); Using Bluetooth wireless devices (select products only)

To insert a SIM card, follow these steps:
1. Turn o the tablet by using the Shut down command.
2. Disconnect all external devices connected to the tablet.
3. Unplug the power cord from the AC outlet.
4. Lift the cover (1) on the left edge of the tablet.
5. Insert the micro SIM card into the micro SIM card slot (2), and then press in on the micro SIM card until it
is rmly seated.
NOTE: The micro SIM card in your tablet may look slightly dierent from the illustration in this section.
To remove a micro SIM card, lift the cover, press in on the micro SIM card, and then remove it from the slot.
Using GPS (select products only)
Your tablet may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location,
speed, and direction information to GPS-equipped systems.
For more information, see the HP GPS and Location software Help.
Using Bluetooth wireless devices (select products only)
A Bluetooth device provides short-range wireless communications that replace the physical cable connections
that traditionally link electronic devices such as the following:
●
Computers (desktop, notebook, tablet)
●
Phones (cellular, cordless, smartphone)
●
Imaging devices (printer, camera)
●
Audio devices (headset, speakers)
●
Mouse
●
External keyboard
10 Chapter 3 Network connections