a. Remove the display bezel.
b. Remove the webcam/microphone module.
c. Remove the display panel.
d. Disconnect the display panel cable (1) from the display LED board.
e. Detach the display LED board (3) from the display back cover. (The display LED board is attached
to the display back cover with double-sided adhesive.)
f. Remove the display LED board.
The display LED board spare part kit does not include the display LED board cable. The display LED
board cable is included in the Cable Kit, spare part number 809856-001.
15. If it is necessary to replace the display panel cable:
a. Remove the display bezel.
b. Remove the display panel.
c. Disconnect the display panel cable (1) from the display LED board.
d. Detach the display panel cable (2) from the display back cover. (The display panel cable is
attached to the display back cover with double-sided adhesive.)
e. Release the display panel cable from the retention clip (3) built into the left hinge.
42 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
