HP ProCurve 5406zl User Manual

xii
Traffic Class-Based Configuration Model . . . . . . . . . . . . . . . . . . . . . . . 8-2
Creating a Traffic Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Using Match Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Traffic Class Configuration Procedure . . . . . . . . . . . . . . . . . . . . . . 8-5
Optional ICMP Match Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Optional IGMP Match Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
Optional TCP and UDP Match Criteria . . . . . . . . . . . . . . . . . . . . . 8-18
Using CIDR Notation for IPv4/IPv6 Addresses . . . . . . . . . . . . . . 8-20
Resequencing Match/Ignore Statements . . . . . . . . . . . . . . . . . . . . 8-24
Creating a Service Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Creating a PBR Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-29
Troubleshooting PBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31
Modifying Classes in a Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31
Resequencing Classes in a Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-33
Applying a Service Policy to an Interface . . . . . . . . . . . . . . . . . . . . . . 8-34
Displaying Statistics for a Policy . . . . . . . . . . . . . . . . . . . . . . . . . . 8-37
Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-38
Zone Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-39
Zone Class-Based Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-40
Creating a Zone Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-41
Creating a Zone Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-43
Modifying Zones and Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-45
Applying a Zone Policy to a ONE Application . . . . . . . . . . . . . . . . . . . 8-46
Troubleshooting Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-48
Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-49
Index

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM