1
ProCurve Switch vl Modules
Descriptions
ProCurve Switch vl Modules
For the ProCurve Series 4200vl Switches
Descriptions. The ProCurve Switch vl Modules are components that you can
add to a ProCurve vl switch to provide a variety of network connectivity
options.
The following ProCurve vl switches are available as of this printing:
■ ProCurve Switch 4204vl (J8770A), a chassis with four open slots.
■ ProCurve Switch 4208vl (J8773A), a chassis with eight open slots.
■ ProCurve Switch 4202vl-48G (J8771A), a chassis with 48 fixed 10/100/
1000-T ports plus two open slots.
■ ProCurve Switch 4202vl-72 (J8772A), a chassis with 72 fixed 10/100-TX
ports plus two open slots.
The following vl modules are available as of this printing:
Module Description
ProCurve Switch vl
24-Port 10/100-TX
Module
(J8765A)
24 twisted-pair ports with RJ-45
connectors for 10 Mbps or 100
Mbps operation over 100-ohm
unshielded (UTP) or shielded (STP)
twisted-pair cable -- all ports have
the HP Auto MDI-X feature.
ProCurve Switch vl
4-Port Mini-GBIC
Module (J8776A)
4 slots for installing any of the
supported ProCurve mini-GBICs*.
*Supported mini-GBICs: The following ProCurve mini-GBICs are supported by the mini-GBIC vl Module
(as of this printing):
• Gigabit-SX LC mini-GBIC (J4858B, J4858C)
• Gigabit-LX LC mini-GBIC (J4859B, J4859C)
• Gigabit-LH LC mini-GBIC (J4860B, J4860C)
• 1000Base-T mini-GBIC (J8177B)
To Next Page
Loading...
Need help?
General