HP ProDesk 400 G6 SFF

EL-MF877-00 Page 15
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
15
Release front antenna
screw then pull up
antenna cable.
Press rear antenna
cover latch then pull up
cover from chassis.
Release rear antenna
screw then pull up
antenna cable.
See Photo 32, 33, 34,
35, 36
Screw tool:
Cross screwdriver
OD 3.0mm.
Photo 32
Photo 33
Photo 34
Photo 36
1
2
Photo 35