HP ProDesk 400 G7 SFF

EL-MF877-00 Page 2
Template Revision D
last updated May-2022
HP Inc. instructions for this template are available at EL-MF877-01
Item Description
Components and parts requiring selective
treatments
Quantity of
items
included in
product
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
☒ Power Supply capacitor(s) or condenser(s)
1
External electrical cables and cords
☒ AC power cord
☐ Audio, video or data cables
☐ Other: _________
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants (not
including external electrical cables and cords, PCBs or
PCAs already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner.
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
Components containing chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC)
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver
Philip #1
Screwdriver
Torx T15
Heatgun
N/A
Suction cup
N/A
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment including
the required steps to remove the external enclosure.
1. Remove Top cover
2. Remove ODD & cable
3. Remove front bezel
4. Open cage & remove cable from MB