EL-MF877-00 Page 3
Template Revision D
last updated May-2022
HP Inc. instructions for this template are available at EL-MF877-01
5. Remove storage (3.5”HDD or 2.5”HDD) and cable
6. Remove Card reader module
7. Remove WLAN module
8. Remove speaker
9. Remove DIMM
10. Remove SSD
11. Remove add-on card & VGA
12. Remove hood sensor and fan duct
13. Remove Cooler & CPU
14. Remove antenna
15. Remove flex I/O board
16. Remove MB & PSU
3.2 Location of components requiring selective treatment. The photos and/or graphics below identify the location of the parts or
components requiring selective treatment within the main unit. For End-of-Life product disassembly instructions of external
accessories including external power supply (EPS), external keyboard (KB) external mouse and external cables and cords, refer to the
following URL:
End-of-Life Product Disassembly Instructions (hp.com)
Reference to below pages.
To Next Page
Loading...
