HP ProDesk 600 G2 Series User Manual

5. Disconnect the power supply cable from the following system board connectors:
(1): PWR
(2): PWRCMD
(3): PWRCPU
6. Press the tab (1) on the base pan in front of the power supply that holds it in place.
7. Slide the power supply toward the front of the computer, rotate toward the fan so the power supply
clears the lip on the top of the chassis, and then lift the power supply out of the chassis (2).
To install the power supply, reverse the removal procedure.
50 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis

HP ProDesk 600 G2 Series Specifications

General

Processor Options	Intel Core i3, Intel Core i5, Intel Core i7 (6th Gen)
Memory	Up to 64 GB DDR4
Storage Options	HDD, SSD
Graphics	Intel HD Graphics, Optional discrete graphics
Ports	USB 3.0, USB 2.0, DisplayPort, VGA, RJ-45
Form Factor	Small Form Factor (SFF), Mini Tower (MT)
Operating System	Windows 10 Pro, Windows 7 Professional
Expansion Slots	PCIe x16, PCIe x1, PCI
Power Supply	200W
Dimensions	Varies by form factor
Weight	Varies by form factor