HP ProDesk 600 G2 Series User Manual

Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
●
Serial port B
●
SATA0
●
SATA1
●
SATA2
●
SATA3
●
SATA5
●
Front USB ports
●
Rear USB ports
●
USB charging port function
●
Media card reader
Restrict USB Devices
Specify the following categories of USB devices to enable:
●
Allow all USB devices
●
Allow only keyboard and mouse
●
Allow all but storage devices and hubs.
When some devices are restricted, the system will disable USB ports that do not meet the allowed
criteria. This feature is usually combined with similar policies within the operating system since USB
devices can be moved to dierent ports. The ports disabled by the BIOS will remain disabled until the
system is restarted.
Option ROM Launch
Policy
These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is ‘All legacy’ for
Windows 7 and other non-Windows congurations. Default is ‘All UEFI’ for Windows 8.1 or later.
Congure Option ROM Launch Policy
●
All legacy
●
All UEFI
●
All UEFI except video
Power Management
Options
Runtime Power Management (enable/disable)
Allows certain operating systems to reduce processor voltage and frequency when the current software
load does not require the full capabilities of the processor. Default is enabled.
Extended Idle Power States (enable/disable)
Allows certain operating systems to decrease the processors power consumption when the processor is
idle. Default is enabled.
S5 Maximum Power Savings (enable/disable)
Enabling this feature reduces the power of the system as much as possible in the S5 state. Power is
removed from the wake up circuitry, the expansion slots, and any management features while in S5.
Default is disabled.
SATA Power Management (enable/disable)
Enables or disables SATA bus and/or device power management. Default is enabled.
PCI Express Power Management (enable/disable)
Enabling this option permits the PCI Express links to use Active Power State Management (ASPM) to enter
lower power states while not in use. Default is enabled.
Unique Sleep State Blink Rates (enable/disable)
Computer Setup (F10) Utilities 63

HP ProDesk 600 G2 Series Specifications

General

Processor Options	Intel Core i3, Intel Core i5, Intel Core i7 (6th Gen)
Memory	Up to 64 GB DDR4
Storage Options	HDD, SSD
Graphics	Intel HD Graphics, Optional discrete graphics
Ports	USB 3.0, USB 2.0, DisplayPort, VGA, RJ-45
Form Factor	Small Form Factor (SFF), Mini Tower (MT)
Operating System	Windows 10 Pro, Windows 7 Professional
Expansion Slots	PCIe x16, PCIe x1, PCI
Power Supply	200W
Dimensions	Varies by form factor
Weight	Varies by form factor