Fan duct
The fan duct sits between the fan sink and rear of the computer.
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Remove the access panel (Access panel on page 21).
3. Remove the drive cage (Drive cage on page 25).
4. Remove the power cable from the clips at the top of the duct (1).
5. Pull the tabs away from each other (2), and then lift the fan duct out of the computer (3).
To install the fan duct, reverse the removal procedures.
44 Chapter 4 Removal and replacement procedures: Small Form Factor
To Next Page
Loading...
