EasyManua.ls Logo

HP ProDesk 600 - Speaker

HP ProDesk 600
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: After installing a new processor onto the system board, always update the system ROM to
ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be
found on the Web at:
http://www8.hp.com/us/en/support-drivers.html.
Speaker
Description Spare part number
Speaker 645330-001
1. Prepare the computer for disassembly (Preparation for disassembly on page 37).
2. Remove the access panel (
Access panel on page 38).
3. Disconnect the speaker wire from the system board connector labeled SPKR (1).
4. From the inside of the chassis, remove the Torx T15 screw (2) that secures the speaker to the front
of the chassis.
5. Rotate the top of the speaker downward (3), and then remove it from the chassis.
To replace the speaker, reverse the removal procedures.
Speaker
73

Table of Contents

Other manuals for HP ProDesk 600

Related product manuals