Contents 63
CAUTION: The memory slots are structured to ensure proper installation. If you insert a memory
module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the
orientation of the module and reinsert. If the holding clips do not close, the module is not inserted
correctly.
PCI expansion cards
System board PCI expansion slots
There are two PCI expansion slots on the system board.
Figure 45 System board PCI expansion slots
Item Component
Designator
Component Function
1
J52 Low Profile PCIe slot Support a PCIe or PCI-X riser card
2
J18 Full Length /Full Height PCIe slot Support a PCIe or PCI-X riser card
PCI riser card expansion slots
The two PCI Express riser cards attached to the PCI cage convert the functionality of the system board
expansion slots to the slots positioned at a 90° angle from the system board.
NOTE: Users have the option to replace the single Slot PCI Express riser card in Slot 1 and slot 2
with a PCI-X model using the PCI-X riser card option kit. This will allow support for PCI-X devices.
To Next Page
Loading...
