NOTE:
With upgrade of 8SFF Cage/Bkpln (662883-B21), there is no Optical Drive
support.
NOTE:
All cables necessary for proper installation of the 8SFF Cage are included with
this Kit.
NOTE:
With upgrade of 8SFF Cage/Bkpln (662883-B21), an additional storage controller
is required. HP recommends the HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS
Controller (P/N 631670-B21).
NOTE:
The P822 controller has only two internal ports like the P420 controller and
cannot be used to attach both 8SFF drive cages through a single controller. Please see
the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14341_na/14341_na.html
NOTE:
In Gen8, the 8+8SFF solution is designed as a performance configuration
delivering maximum IOPS across the two drive cages. Customers seeking to have all
drives in a single volume should consider the DL380p Gen8 25 SFF Configure-to-order
Server (P/N 665554-B21) as a base.
Hard Drive Cables
HP DL38x/DL360 Gen8 Embedded SATA Cable Kit
664009-B21
HP Networking
Gigabit Ethernet adapters
HP NC112T PCI Express Gigabit Server Adapter
503746-B21
HP NC365T 4-port Ethernet Server Adapter
593722-B21
HP Ethernet 1Gb 4-port 331T Adapter
647594-B21
HP Ethernet 1Gb 2-port 361T Adapter
652497-B21
HP Ethernet 1Gb 2-port 332T Adapter
615732-B21
10 Gigabit Ethernet Adapters
NOTE:
A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
NOTE:
Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately. Please see the
related NIC QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs
.
HP NC523SFP 10Gb 2-port Server Adapter
593717-B21
HP Ethernet 10Gb 2-port 530SFP Adapter
652503-B21
HP Ethernet 10Gb 2-port 530T Adapter
656596-B21
HP Ethernet 10Gb 2-port 560SFP+ Adapter
665249-B21
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
614203-B21
HP 10 GbE PCI-e G2 Dual Port Network Interface Card
516937-B21
FlexibleLOM Adapters
NOTE:
Only one FlexibleLOM can be added to the server. These options are upgradeable
and can be changed from the original configuration after the server is shipped.
NOTE:
Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately. Please see the
related NIC QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs
.
HP Ethernet 1Gb 4-port 331FLR Adapter
629135-B21
QuickSpecs
HP ProLiant DL380p Generation8 (Gen8)
Core Options
DA - 14212 North America — Version 38 — July 22, 2013
Page 37
To Next Page
Loading...
Need help?
General
