HP Ethernet 1Gb 4-port 366FLR Adapter
665240-B21
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
647581-B21
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
629142-B21
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
665243-B21
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
www.hp.com/go/ProLiantNICs
HP InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
583211-B21
HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA
592520-B21
HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
649281-B21
NOTE:
For the following two InfiniBand Adapters, only 1 FlexibleLOM can be added to
the server, which is selected in Step 2 for the "Configuration Information - Factory
Integrated Models" section. These two options are for upgrade or change from original
configuration.
NOTE:
FLR Indicates new HP FlexibleLOM Adapter series.
HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter
649282-B21
HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter
649283-B21
NOTE:
10Gb Ethernet requires the use of the QSFP to SFP+ adapter P/N 655874-B21.
NOTE:
Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
HP I/O Expansion Options
HP DL380p/560 Gen8 3 Slot PCI-E Riser Kit
653206-B21
HP DL380p/560 Gen8 2 Slot 2x16 PCI-E Riser Kit
653208-B21
HP DL380p Gen8 Double Wide Riser Cage Kit
NOTE:
Kit is required to support a nVidia Q6000 double wide graphics card.
NOTE:
Kit contains a power cable for the nVidia Q6000 double wide graphics card.
NOTE:
The double wide riser cage kit is not supported in the 12LFF and 25SFF
Configure-to-order Servers.
662885-B21
HP DL380p Gen8 NEBS Conversion Cage Kit
NOTE:
This conversion kit is only available for the 8SFF base server model.
NOTE:
A NEBS conversion cage kit is required for each riser in an 8SFF base server for
the server to meet NEBS and ETSI certification.
707865-B21
QuickSpecs
HP ProLiant DL380p Generation8 (Gen8)
Core Options
DA - 14212 North America — Version 38 — July 22, 2013
Page 38