HP ProLiant ML110 Operating System Installation Guide

Installing Novell NetWare 6.0 and Novell Small Business Suite
If you have a SCSI, SCSI RAID, or IDE RAID model, you need to install the
corresponding HP driver for such model (the SCSI driver proposed by default by
NetWare does not install properly):
a. Scroll down to choose Modify and press Enter.
b. Scroll down to highlight the Storage Adapters item and press Enter.
The installation program displays the drivers detected: a SCSI driver and a generic
ATA/IDE/ATAPI Adapter driver (IDEATA.HAM).
c. Press Delete to remove the default SCSI driver.
The only remaining driver should be the IDEATA.HAM driver.
CAUTION: Do NOT remove the
IDEATA driver because it is used by the CD-ROM drive.
d. Insert the HP disk NW SCSI diskette you created earlier in the floppy drive.
e. Click Insert to add a driver, and then click Insert again to add an unlisted driver.
f. Press F3 and specify the path: A: then press Enter.
The installation program will scan the floppy drive for compatible drivers and then
automatically add the HP SCSI driver to the driver list.
NOTE: The new HP driver may show the same device name description, however it is an updated
version.
g. Scroll down and select Return to driver summary.
h. Scroll down and click Continue.
2. The next Driver names
summary screen displays storage and network devices. You need
to manually install the HP LAN driver:
a. Scroll down to choose Modify and press Enter.
b. Scroll down to highlight the Network boards item and press Enter.
The installation program displays the drivers detected.
c. Delete the drivers you wish to replace by selecting them and pressing the Delete key.
d. Insert the HP disk NW LAN diskette you created earlier in the floppy drive.
e. Click Insert to add a driver, and then click Insert again to add an unlisted driver.
f. Press F3 and specify the path: A: then press Enter.
The installation program will scan the floppy drive and then automatically add the
HP LAN driver to the driver list.
g. Scroll down and select Return to driver summary.
h. Scroll down and select Continue.
4-4 HP ProLiant ML110 Server Network Operating System Installation Guide

HP ProLiant ML110 Specifications

General

Product Line	ProLiant
Server Type	Tower
Processor	Intel Xeon E3-1200 series
Chipset	Intel C202
Memory Slots	4
Storage	SATA Hard Drives (HDDs) or Solid State Drives (SSDs)
Drive Bays	4 LFF or 8 SFF
RAID Support	RAID 0, 1, 10
Form Factor	Tower
Management	HP iLO
Operating System Support	Windows Server, Linux, VMware
Memory	DDR3 or DDR4 ECC Unbuffered DIMMs (UDIMMs) (depending on the specific generation)