Hardware options installation 54
8.
Remove the fan blanks from bay 1 and bay 3. Retain the blanks for future use.
9. Install the redundant fans.
10. Install the fan cage.
11. Install the air baffle.
12. If removed, install the BBWC battery pack or the FBWC capacitor pack ("Installing the BBWC battery
pack or the FBWC capacitor pack" on page 86).
13. Install fan 5.
14. Install the access panel.
15. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.
16. Power up the server (on page 22, "Powering up and configuring the server" on page 40).
To Next Page
Loading...
