HP rp5800 Quickspecs

Front View Quantity Supported Position Controller
3.5-inch SATA Hard Drive 3 1, 2 * , 3 SATA
Optical Drive Bay or Carrier for
Hard Drive
1 2 SATA
External HDD can be connected through optional external ESATA port. 3 Drive maximum
NOTE: When ESATA is installed, either the 2nd HDD (if applicable) or ODD (if applicable) cannot be used.
* For CRU Removable storage in lieu of ODD
Data Storage Drives
250-GB Hard Disk Drives
HP 250-GB SATA 3.0 Hard Disk Drive (3.5” )
7,200 rpm, 8MB cache, 6.0 GB/s, NCQ, Smart IV
HP 250-GB SATA 3.0 Removable Hard Disk Drive (3.5")
7,200 rpm, 8MB cache, 6.0 GB/s, NCQ, Smart IV
500-GB Hard Disk Drives
HP 500-GB SATA 3.0 Hard Disk Drive (3.5")
7,200 rpm, 16MB cache, 6.0 GB/s, NCQ, Smart IV
HP 500-GB SATA 3.0 Removable Hard Disk Drive (3.5")
7,200 rpm, 16MB cache, 6.0 GB/s, NCQ, Smart IV
1-TB Hard Disk Drives
HP 1 TB SATA 3.0 Hard Disk Drive (3.5")
7,200 rpm, 16MB cache, 6.0 GB/s, NCQ, Smart IV
Solid State Drives (2.5” Drives use a 3.5" drive cage adapter)
HP 32-GB 2.5” SSD
HP 64-GB 2.5” SSD
HP 120-GB 2.5” SSD
QuickSpecs
HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 North America — Version 12 — November 8, 2013 Page 8

HP rp5800 Specifications

General

Processor	Intel Core i3-2120 (3.3 GHz, 3 MB cache, 2 cores)
Memory	4 GB DDR3
Storage	500 GB SATA (7200 rpm)
Operating System	Windows 7 Professional (64-bit)
Ports	VGA, DisplayPort, serial, parallel, audio in/out, RJ-45
Power Supply	240W