EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Open the CPU cover and take off
the plastic cover, check whether
there is PIN bend issue,See photo
2 for the bend pin
Put the CPU onto the CPU socket
vertical by fixture, see photo 3 and 4
Put the CPU onto the CPU socket
vertical by fixture, see photo 3 and
4
Locking the CPU holder, and during this
process, the CPU holder clip will drop
from the CPU holder,take clip away from
the MB, see photo 5 and 6
Lock the heat sink to MB, and lock the
3 screws based on the sequence
shown on heat sink,see photo 7and 8
Disassembly process (Installing visa cover)
To Next Page
Loading...
