Installation and configuration 15
P430 Enablement Cable Kit
For the ProLiant SL270s Gen8 Server
Mini-SAS P430/P830 Cable
For the ProLiant SL210t Gen8 Server
ML350p Gen8 Smart Array
For the ProLiant ML350p Gen8 Server
6G SAS P430/830 Primary
For the ProLiant DL380p Server and the
ProLiant DL385p Gen8 Server 8SFF model
6G SAS P430/830
For the ProLiant DL380p Server and the
ProLiant DL385p Gen8 8+8SFF model
DL38Xp Gen8 12 Large
Form Factor (LFF) P430/830
For the ProLiant DL380p Server and the
ProLiant DL385p Gen8 Server 12LFF model.
DL38Xp Gen8 25 Small
Form Factor (SFF) P430/830
Cable Kit
For the ProLiant DL380p Server,the ProLiant
DL385p Gen8 Server 25SFF model, and the
ProLiant DL560 Gen8 Server.
DL580 Gen8 SAS Controller
For the ProLiant DL580 Gen8 Server
DL360e Gen8 Internal SAS
For the ProLiant DL360e Gen8 Server and the
ProLiant ML350e Gen8 v2 Server
DL380e Gen8 Internal SAS
540 mm Cable
For the ProLiant DL380e Gen8 Server and the
ProLiant ML350e Gen8 v2 Server
DL380e Gen8 Internal SAS
For the ProLiant DL380e Gen8 Server and the
ProLiant ML350e Gen8 v2 Server
DL380e Gen8 Internal SAS
For the ProLiant DL380e Gen8 Server and the
ProLiant ML350e Gen8 v2 Server
ML350e Gen8 v2 Smart
For the ProLiant ML350e Gen8 v2 Server
Configuration tools
HPE Smart Storage Administrator
HPE SSA is the main tool for configuring arrays on Smart Array controllers. It exists in three interface
formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA Scripting. All formats provide support for
configuration tasks. Some of the advanced tasks are available in only one format.
The diagnostic features in HPE SSA are also available in the standalone software HPE Smart Storage
Administrator Diagnostics Utility CLI.
Starting with HPE SSA and HPE ProLiant Gen8 servers and server blades, HPE SSA is accessible both
offline and online:
• Accessing HPE SSA in the offline environment
IMPORTANT: If you are updating an existing server in an offline environment, obtain the
latest version of HPE SSA through Service Pack for ProLiant before performing configuration
procedures.
Using one of multiple methods, you can run HPE SSA before launching the host operating system. In
offline mode, users can configure or maintain detected and supported ProLiant devices, such as
optional Smart Array controllers and integrated Smart Array controllers. Some HPE SSA features
are only available in the offline environment, such as setting the boot controller and boot volume.
For more information, see "Accessing HPE SSA in the offline environment" in the HPE Smart
Storage Administrator User Guide.
To Next Page
Loading...
Need help?
General
