HP Smart Array P830

Component identification 7
1 - Amber 2 - Green 3 - Green Interpretation
Off
Off
Off
The cache module is not powered.
Off
Flashing once
every 2 seconds
Flashing once
every 2 seconds
The cache microcontroller is executing from within its
boot loader and receiving new flash code from the host
controller.
Off
Flashing once
per second
Flashing once
per second
The cache module is powering up, and the battery
pack is charging.
Off
Off
Flashing once
per second
The cache module is idle, and the battery pack is
charging.
Off
Off
On
The cache module is idle, and the battery pack is
charged.
Off
On
On
The cache module is idle, the battery pack is charged,
and the cache contains data that has not yet been
written to the drives.
Off
Flashing once
per second
Off
A backup of the DDR content on the cache module is
in progress.
Off
On
Off
The current backup is complete with no errors.
Flashing once
per second
Flashing once
per second
Off
The current backup failed, and data has been lost.
Flashing once
per second
Flashing once
per second
On
A power error occurred during the previous or current
boot. Data may be corrupt.
Flashing once
per second
On
Off
An overtemperature condition exists.
Flashing twice
per second
Flashing twice
per second
Off
The battery pack is not attached.
Flashing twice
per second
Flashing twice
per second
On
The battery has been charging for 10 minutes, but has
not reached sufficient charge to perform a full backup.
On
On
Off
The current backup is complete, but power
fluctuations occurred during the backup.
On
On
On
The cache module microcontroller has failed.