106 Fabric OS Troubleshooting and Diagnostics Guide
53-1002150-02
Automatic trace dump transfers
10
Saving comprehensive diagnostic files to the server
1. Connect to the switch and log in as admin.
2. Enter the supportSave -c command and respond to the prompts.
switch:admin> supportsave -c
This command will collect RASLOG, TRACE, supportShow, core file, FFDC data
and other support information and then transfer them to a FTP/SCP server
or a USB device. This operation can take several minutes.
NOTE: supportSave will transfer existing trace dump file first, then
automatically generate and transfer latest one. There will be two trace dump
files transfered after this command.
OK to proceed? (yes, y, no, n): [no] y
To Next Page
Loading...
