HP SN6000B Release Note

HP Network Advisor 11.1.1 fixes
Table 8 lists the defects that were closed for this release.
Table 8 HP Network Advisor 11.1.1 closed defects
SolutionClosed fixes summary
Workaround prior to upgrade: Close
the dialog and reopen it to enable the
ASM bit.
Fixed in HP Network Advisor 11.1.1.
ASM is not set when activating the Active Configuration with Act-
ive=Save option enabled in the Active Matrix confirmation dialog.
Fixed in HP Network Advisor 11.1.1
In a FICON environment, the configure cascaded operation fails while
setting HIF and does not display a reason for the failure.
Fixed in HP Network Advisor 11.1.1
The ModifyRole( ) method for DCB devices fails to modify the complete
rule of an ACL policy for an SMI Agent.
Fixed in HP Network Advisor 11.1.1
CreateACL/DeleteACL/ModifyACL methods are deployed successfully
to VF enabled DCB devices, but the SMI agent returns a "Not Suppor-
ted" error code
Fixed in HP Network Advisor 11.1.1
A boot image update fails with an error message for windows and
VMware ESX hosts.
Fixed in HP Network Advisor 11.1.1
Installation hangs at ‘Initialize Database' when a non-default database
port number is provided in the Server Configuration page of the Con-
figuration Wizard.
Fixed in HP Network Advisor 11.1.1The Help dialog is not getting launched in the driver repository dialog.
Fixed in HP Network Advisor 11.1.1
Previous settings in the LUN selection screen are not active when
adding a new LUN path, and users are required to re-apply the LUN
setting in the ' LUN view' dialog.
Fixed in HP Network Advisor 11.1.1
Duplicate ESX host entries are shown in the Product Tree for all the
discovered vCenters after the fabric connected to the ESX host is un-
monitored and monitored.
Fixed in HP Network Advisor 11.1.1
In a FICON environment, the merge Operation fails with the error
message Internal error occurred - Failed to perform
the requested cascaded FICON merge configurations.
Fixed in HP Network Advisor 11.1.1
Deleting a vCenter fails when the fabric is unmonitored, but a host is
still being managed by the vCenter.
Fixed in HP Network Advisor 11.1.1Changing Top Talkers from Tx to Rx fails with an error.
Fixed in HP Network Advisor 11.1.1
Setting SCC policy fails due to the inability to establish connection to
the switch.
Fixed in HP Network Advisor 11.1.1
In the LSAN zoning dialog, the Alias name is not shown in the WWN-
fabric assigned potential member panel.
Fixed in HP Network Advisor 11.1.1
Ping or traceroute fail when IP interfaces and crossport interfaces are
defined on XGE ports.
HP Network Advisor B-series Enterprise, Professional Plus, and Professional 11.1.1 Release
Notes 23

HP SN6000B Specifications

General

Brand	HP
Model	SN6000B
Category	Switch
Language	English