To Next Page

To Previous Page

Unsupported product models

The following product models cannot be upgraded to Fabric OS 6.2.0b:

• HP StorageWorks Core Switch 2/64, which operates with Fabric OS 5.0.x (Brocade 12000)

• HP StorageWorks SAN Director 2/128 (Brocade 24000)

• HP StorageWorks MSA SAN Switch 2/8, which operates with Fabric OS 3.2.x (Brocade 3000)

• HP StorageWorks SAN Switch 2/8V (Brocade 3250)

• HP StorageWorks SAN Switch 2/16V (Brocade 3850)

• HP StorageWorks SAN Switch 2/16, which operates with Fabric OS 3.2.x (Brocade 3800)

• HP StorageWorks SAN Switch 2/32 (Brocade 3900)

• HP StorageWorks Multi-protocol (MP) Router, which operates with XPath OS 7.4.x (Brocade

AP7420)

IMPORTANT:

Any enhancements for the models listed above will be delivered in Fabric OS 3.2.x, Fabric OS 5.x,

and XPath OS 7.4.x sustaining releases.

Devices supported

For a list of supported devices, see the HP website:

http://www.hp.com/go/san

Operating systems

For a list of operating systems, see the HP website:

http://www.hp.com/go/san

Access Gateway support

Access Gateway is supported with the following HP products only:

• Brocade 4-Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

• Brocade 4-Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)

• HP StorageWorks 4/16 SAN Switch (Brocade 200E)

• HP StorageWorks 8/8 SAN Switch (Brocade 300)

• HP StorageWorks 8/24 SAN Switch (Brocade 300)

• HP StorageWorks 8/40 SAN Switch (Brocade 5100)

HP StorageWorks 4/8 - SAN Switch Release Note

Other manuals for HP StorageWorks 4/8 - SAN Switch