Previously licensed software now part of base Fabric OS
The following capabilities are included as part of the base Fabric OS capability and no additional
purchase or licensing is necessary.
NOTE:
Advanced Zoning and Web Tools licenses are no longer necessary, beginning with Fabric OS 6.1.
These features are automatically enabled on all products running Fabric OS 6.1 or later
Supported switches
The following switches are supported with Fabric OS 6.2.0b:
• HP StorageWorks 4/8 and 4/16 SAN Switch
• HP StorageWorks 8/8 and 8/24 SAN Switch
• Brocade 4Gb SAN Switch for HP p-Class BladeSystem
• Brocade 4Gb SAN Switch for HP c-Class BladeSystem
• HP StorageWorks EVA4400 Embedded Switch Module
• HP StorageWorks 8Gb SAN Switch for HP BladeSystem c-Class
• HP StorageWorks SAN Switch 4/32
• HP StorageWorks 4/64 SAN Switch
• HP StorageWorks SAN Switch 4/32B
• HP StorageWorks 8/40 SAN Switch
• HP StorageWorks 8/80 SAN Switch
• HP StorageWorks Encryption SAN Switch
• HP StorageWorks 400 Multi-protocol Router
• HP StorageWorks 4/256 SAN Director
• HP StorageWorks DC SAN Backbone Director
• HP StorageWorks DC04 SAN Director
• HP DC Switch Encryption FC Blade
• HP StorageWorks 4/256 SAN Director 16 Port 4–Gb Blade
• HP StorageWorks 4/256 SAN Director 32 Port 4–Gb Blade
• HP StorageWorks 4/256 SAN Director 48 Port 4–Gb Blade
• HP StorageWorks Multiprotocol Router Blade
• HP StorageWorks B-Series iSCSI Director Blade
• HP StorageWorks SAN Director 16 Port 8–Gb FC Blade
• HP StorageWorks SAN Director 32 Port 8–Gb FC Blade
• HP StorageWorks SAN Director 48 Port 8–Gb FC Blade
• HP StorageWorks SAN Director 6 Port 10–Gb FC ISL Blade
Standards compliance
This software conforms to the Fibre Channel Standards in a manner consistent with accepted
engineering practices and procedures. In certain cases, HP might add proprietary supplemental
HP StorageWorks Fabric OS 6.2.0b release notes 7
To Next Page
Loading...
Need help?
General