HP StorageWorks XP20000/XP24000 - Disk Array - Page 108

Detailed information displays for this operation, as shown in Table 63.
Table 63 Pairresync Operation
DescriptionItem
The port number, host group number, and LUN of the primary data volumeP-VOL (Port-G-ID-LUN)
The port number, host group number, and LUN of the secondary data volumeS-VOL (Port-G-ID-LUN)
The mirror IDMirrorID
The serial number of the logical device (storage system)S/N
The controller IDCTRLID
The priority of copyPriority
The consistency group IDCTG
The range to restore the pair
Group: Group range. LU: LU range
Range
The master journal group numberM-JNLG
The restore journal group numberR-JNLG
The error level. Group: Group level. LU: LU levelError Level
Indicates the Resync Mode
Normal: normal resync, Delta: delta resync,
Return to standby: return to standby status
Resync Mode
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairsNum. of Pairs
Pairsplit-r Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac-J],Pairsplit-r,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,S/N,CTRLID,Type,S-VOL Write,
Range,
Suspend Mode,Result}=[{1A-0x00-0x000,5A-0x00-0x000,0x00,65432,5,P-VOL,Disable,LU,
Flush,
Normal end},
-{1A-0x00-0x001,5A-0x00-0x001,0x00,65432,5,P-VOL,Disable,LU,Flush,Normal end},
Num. of Pairs=2
[Cnt Ac-J]
HP XP Continuous Access Journal Software function
Pairsplit-r
XP Continuous Access Journal Software Function108