HP StorageWorks XP20000/XP24000 - Disk Array - Page 132

DescriptionParameter
The cache memory is not used.Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 86.
Table 86 Change-CacheMode Operation
DescriptionItem
External volume group number for the executed setting operation.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of external volumes groups configured.Num. of Groups
ChangePaths(FIBRE) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],ChangePaths(FIBRE),,Normal end,,,Seq.=xxxxx
+{ExGroup,PathGroup,Result}={E1-1,1,Normal end}
++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0001},{2A,50560E8000C3E212,0x0001},
{3A,50560E8000C3E213,0x0001},{4A,50560E8000C3E214,0x0001}],Num. of Paths=4
+{ExGroup,PathGroup,Result}={E1-2,1,Normal end}
++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0001},{2A,50560E8000C3E212,0x0001},
{3A,50560E8000C3E213,0x0001},{4A,50560E8000C3E214,0x0001}],Num. of Paths=4
+Num. of Volumes=2
[Ext Stor]
HP XP External Storage Software function
ChangePaths(FIBRE)
ChangePaths(FIBRE) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
XP External Storage Software Function132