HP StorageWorks XP20000/XP24000 - Disk Array - Page 131

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],BlockPaths(FIBRE),,Normal end,,,Seq.=xxxxx
+{Port,WWN,Result}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end},
{2A,50560E8000C3E212,Normal end}],Num. of Paths=3
[Ext Stor]
HP XP External Storage Software function
BlockPaths(FIBRE)
BlockPaths(FIBRE) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 84.
Table 84 BlockPaths(FIBRE) Operation
DescriptionItem
The port name of the external port of the local storage system.Port
The WWN of the Target port of the external storage system.WWN
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mapping paths that has been disconnected.Num. of Paths
Change-CacheMode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],Change-CacheMode,Enable,Normal end,,,Seq.=xxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num. of Groups=XXX
[Ext Stor]
HP XP External Storage Software function
Change-CacheMode
Change-CacheMode operation
Enable
Enable is the selected parameter. The operation uses the parameters shown in Table 85.
Table 85 Parameters for Change-CacheMode Operation
DescriptionParameter
The cache memory is used.Enable
XP24000/XP20000 Audit Log User and Reference Guide 131