Detailed information displays for this operation, as shown in Table 123.
Table 123 Install Operation (Installing Additional Subsystems, ECC Groups or LDEVs)
DescriptionItem
The Disk Adapter (DKA) mounting locationDisk Adapter (DKA)
The type of Disk Adapter (DKA)Kind
The transfer rate of Disk Adapters (DKA)Transfer Rate
The number of Disk Adapters (DKA)
Num. of Disk
Adapters (DKA)
The mounting location of Disk Unit (DKU)Disk Unit (DKU)
The type of AC-BOXAC-BOX
The number of Disk Units (DKU)
Num. of Disk Units
(DKU)
The mounting location of the fibre switch.FSW
The number of FSWsNum. of FSWs
The parity group numberPG
The RAID LevelRAID Level
The type of the driveDrive Type
The emulation typeEmulation
The RAID concatenated parity group number. A hyphen (-) is indicated when the parity
group is not RAID concatenated.
Concatenation
The status of the encryption setting
Disable or Enable will appear.
Encryption
The LDKC, CU, and LDEV numbersLDKC:CU:LDEV
The capacity of CVSize
The unit of the capacity of CVUnit
The status of the system disk setting
Disable or Enable will appear.
System Disk
The subsystem IDSSID
The number of LDEVsNum. of LDEVs
The number of parity groupsNum. of PGs
XP24000/XP20000 Audit Log User and Reference Guide 163
To Next Page
Loading...
