HP StorageWorks XP20000/XP24000 - Disk Array - Page 164

DescriptionItem
The B4 numberB4
The spare drive numberSPARE
The number of spare drivesNum. of SPAREs
NOTE:
Only the changed items will be output. The Detailed Information for the recovery process will not be
output when the installation process executed before the process has finished. However, the setting of
the recovery process will be output as the Detailed information for the process when the installation
process executed before the recovery process has not finished.
Example 3 (installing additional cache memory)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{CM,CMG,size,On-Demand}=[{Basic,2048,16384,0},{Option1,2048,16384,0},{Option2,
2048,16384,0},
{Option3,2048,16384,0}],Num. of CMs=4
+DCR available size=1280
+{CLPR,Cache size,DCR size,Extent Number}=[{CLPR0,65536,1280,16384}],
Num. of CLPRs=1
+{SM,Slot,Size}=[{1SC/2SD,15,512},{1SC/2SD,16,512}],Num. of SMMs=2
+{Battery,Define}=[{BATTERY-14,Install},{BATTERY-24,Install},{BATTERY-15,
Install},
{BATTERY-25,Install}],Num. of Batteries=4
[Install]
Install function
Install
Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 124.
Table 124 Install Operation (Installing Additional Cache Memory)
DescriptionItem
The mounting location of the PCB for cache memory.CM
The capacity of CMG.CMG
The capacity of cache memory.Size
The capacity of On-Demand.On-Demand
The number of cache memory.Num. of CMs
Install Function164