Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 131.
Table 131 Make LUSE Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of several LDEVs combined into a LUSE volume. The
number indicated at the beginning represents the LDKC, CU, and LDEV numbers of the
top LDEV.
LUSE(LDKC:CU:LDEV)
The number of LUSE volumes configuredNum. of LUSEs
Make Vol./Vol. Init Operation
This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Make Vol./Vol. Init,,Normal end,,,Seq.=xxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID}=[{1-1-(1),
0x00:0x14:0x00,
-,OPEN-V,205440,LBA,Disable,0x0005}],Num. of LDEVs=1
[Install]
Install function
Make Vol./Vol. Init
Make Vol./Vol. Init operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table 132.
Table 132 Parameters for Make Vol./Vol. Init Operation
DescriptionParameter
Formatted Make Volume or Volume Initialize.No parameter
Unformatted Make Volume or Volume Initialize.Non Format
The progress window of LDEV format is closed.Progress Close
Quick Format is selected.Quick Format
The progress window of preparing for Quick Format is closed.Quick Format Close
NOTE:
No parameters are selected for any case other than those described in this table.
Install Function170
To Next Page
Loading...
