Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 133.
Table 133 Make Vol./Vol. Init
DescriptionItem
The parity group numberPG
The LDKC, CU, and LDEV numbersLDKC:CU:LDEV
The emulation typeEmulation
The capacity of CVSize
The unit of the capacity of CVUnit
The setting status of system disk
Disable or Enable will appear.
System Disk
The subsystem IDSSID
The number of LDEVsNum. of LDEVs
Micro Program Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Micro Program,,Normal end,,,Seq.=xxxxx
+Micro Media=Floppy Disk
+Exchange How=Online
+Open Port Mode=Stop SCSI
+Reboot Grp.=By 1/2
+{Micro Kind, Old Ver, New Ver}=[{DKCMAIN, 5007000000, 5007000001},
{SVP, 50070000, 50070001},(snip)],Num.of Kind=10
[Install]
Install function
Micro Program
Micro Program operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
XP24000/XP20000 Audit Log User and Reference Guide 171
To Next Page
Loading...
