Detailed information displays for this operation, as shown in Table 134.
Table 134 Micro Program Operation
DescriptionItem
The media which the microcode to be exchanged is stored (Floppy disk, CD-ROM, SVP
HDD, HDD Backup or remote transfer).
Micro Media
The method to exchange the microcode.
Online: Exchanging the microcode online, Offline: Exchanging the microcode offline.
Exchange How
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI
Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output
when the PCB of the open system is not installed, or MP reboot is not executed.
Open Port Mode
The reboot group (By1/2, By1/4, or By One). However, it is not output when microcode
is changed offline, or MP reboot is not executed.
Reboot Grp.
The kind of microcode.Micro Kind
The old version number of the microcode.Old Ver
The new version number of the microcode.New Ver
The number of the kind of microcode.Num.of Kind
MP Install Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],MP Install,,Normal end,,,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG},
Num. of Kind=7
+Target MP={CHP00-1E,CHP01-1E,DKP80-1A},Num. of MP=3
[Install]
Install function
MP Install
MP Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 135.
Table 135 MP Install Operation
DescriptionItem
The kind of microcode installed.Micro Program
Install Function172
To Next Page
Loading...
