HP StorageWorks XP20000/XP24000 - Disk Array - Page 173

DescriptionItem
The number of the kind of the installed microcode.Num. of Kind
The mounting location of the installed microcode.Target MP
The number of microcode installed.Num. of MP
M/F DCR (Cache Residency Manager for z/OS) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],M/F DCR,,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start CC-HH,End CC-HH}=[{Set,Bind,No,00-00,00-10},
{Set,Priority,Yes,1000-00,1009-14}],{Delete,-,-,1000-00,1009-14}],
Num. of DCR Settings=3
[Install]
Install function
M/F DCR
M/F DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 136.
Table 136 M/F DCR Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where
Cache Residency is set
LDKC:CU:LDEV
The setting status of Cache Residency
Set: set, Delete: cancel
Define
The setting mode of Cache Residency - Indicates a dash (-) when Define is Delete
Bind: Bind mode, Priority: Priority mode
Mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-)
when Define is Delete.
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
Prestaging
The starting cylinder number (CC) and the starting head number (HH) which the Cache
Residency is set or canceled
Start CC-HH
The ending cylinder number (CC) and the ending head number (HH) which the Cache
Residency is set or canceled
End CC-HH
XP24000/XP20000 Audit Log User and Reference Guide 173